Siemens FS720 Mounting & Installation page 57

Building Technologies
Fire Safety
IN_MON_5
X12
IN_MON_5
IN_MON_6
IN_MON_6
IN_MON_7
IN_MON_7
IN_MON_8
IN_MON_8
IN_MON_9
IN_MON_9
IN_MON_10
IN_MON_10
● EOL resistor: 3.3 kΩ
● Max. cable resistance, both conductors: 80 Ω
Input monitoring
The resistance range of the entire line – measured at the input terminals
'IN_MON+' and 'IN_MON-' when the site is switched off – determines the defined
state of the input status. The status varies depending on the input type configured.
The status ACTIVE has two values:
● ACTIVE 1 is when the 1200 Ω resistor is used
● ACTIVE 2 is when the 680 Ω resistor is used and
● ACTIVE 1 + 2 is when both resistors are used ('simple switchable' and
'complex switchable')
The circuits and the definition of the coverage areas per input type are listed below.
Mounting and installing extinguishing control panels
Card cage connections (1 sector exting.) FCA2046
+
1
-
2
+ 3
-
4
+ 5
-
6
7
+
-
8
+ 9
-
10
+ 11
-
12
6
57 | 248
A6V10210390_m_en_--
2018-08-29