ZyXEL Communications ZyXEL Dimension ES-2048 User Manual page 236

ES-2048 User's Guide
Table 74 interface port-channel Commands (continued)
COMMAND
egress set
<port-list>
igmp-immediate-
leave
igmp-filtering
profile <name>
igmp-group-
limited
igmp-group-
limited number
<number>
igmp-querier-
mode
<auto|fixed|edg
e>
pvid <1-4094>
ingress-check
gvrp
frame-type
<all|tagged|unt
agged>
name <port-
name-string>
vlan-trunking
flow-control
bandwidth-limit
234
DESCRIPTION
Sets the outgoing traffic port list for
a port-based VLAN.
Enables IGMP immediate leave on
the port.
Sets the IGMP filtering profile for
this port.
Limits the number of multicast
groups.
Sets the number of multicast
groups this port is allowed to join.
Sets the IGMP querier mode of a
port.
Selects auto to treat the IGMP
queries normally, fixed to
always treat the port as a querier
port no matter there is a query or
edge to treat the port as a non-
querier port which drops any IGMP
queries received.
The default PVID is VLAN 1 for all
ports. Sets a PVID in the range 1 to
4094 for the specified interface.
Enables the device to discard
incoming frames for VLANs that
are not included in a port member
set.
Enables this function to permit
VLAN groups beyond the local
switch.
Choose to accept both tagged and
untagged incoming frames, just
tagged incoming frames or just
untagged incoming frames on a
port.
Sets a name for the port(s). Enter
a descriptive name (up to nine
printable ASCII characters).
Enables VLAN Trunking on ports
connected to other switches or
routers (but not ports directly
connected to end users) to allow
frames belonging to unknown
VLAN groups to pass through the
switch.
Enables interface flow control.
Flow control regulates
transmissions to match the
bandwidth of the receiving port.
Enables ingress (pir), cir and
egress limits on the port(s).
Chapter 31 Introducing Commands
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13
13
13