Logging Out; Command Summary; User Mode; Table 71 Command Summary: User Mode - ZyXEL Communications ZyXEL Dimension ES-2048 User Manual

ES-2048 User's Guide
• Use the same configuration file to set all switches (of the same model) in your network to
the same settings.
Note: You may also edit a configuration file using a text editor.
Make sure you use valid commands. The switch rejects configuration files with
invalid or incomplete commands.

31.10.2 Logging Out

In User or Enable mode, enter the
mode entering
logs you out of the CLI.
logout

31.11 Command Summary

The following sections summarize the commands available in the switch together with a brief
description of each command. Commands listed in the tables are in the same order as they are
displayed in the CLI. See the related section in the User's Guide for more background
information.

31.11.1 User Mode

The following table describes the commands available for User mode.
Table 71 Command Summary: User Mode
COMMAND
help
logout
exit
history
enable
show ip
hardware-monitor
<C|F>
system-information
ping <IP|host-name>
218
exit
takes you out of the Config mode and into Enable mode and entering
exit
DESCRIPTION
Displays help information.
Exits from the CLI.
Logs out from the CLI.
Displays a list of previously command(s) that you
have executed. The switch stores up to 256
commands in history.
Accesses Enable (or privileged) mode. See
31.11.2 on page
Displays IP related information.
Displays current hardware monitor information with
the specified temperature unit (Celsius C or
Fahrenheit F).
Displays general system information.
Sends Ping request to an Ethernet device.
or command to log out of the CLI. In Config
logout
219.
Chapter 31 Introducing Commands
PRIVILEGE
0
0
0
0
Section 0
0
0
0
0