Member Config - ZyXEL Communications ZyXEL Dimension ES-2048 User Manual

ES-2048 User's Guide
Table 72 Command Summary: Enable Mode (continued)
COMMAND
https
multi-login
plt
mac-aging-time
cluster
igmp-filtering
profile
igmp-snooping
multicast
mvr
diffserv
igmp-flush
kick tcp <Session ID>
mac-flush
<port-num>
erase running-config
222
DESCRIPTION
Displays current SSH session(s).
session
Displays the HTTPS information.
Displays current HTTPS
session
session(s).
Displays the HTTPS certificates.
certificate
key <rsa|dsa> Displays the HTTPS key.
Displays the HTTPS session
timeout
timeout.
Displays multi-login information
Displays Packet Loop Test (PLT). 13
Displays MAC learning aging
time.
Displays cluster management
status.
Displays cluster candidate
candidates
information.
Displays the MAC address of the
member
cluster member(s).
Displays the status of the cluster
member mac <mac-
member(s).
addr>
Displays the configuration of the

member config

cluster member(s).
Displays IGMP filter profile
settings.
Displays IGMP snooping settings. 13
Displays multicast settings.
DIsplays all MVR (Multicast VLAN
Registration) settings.
<vlan-id> DIsplays specified MVR
information.
Displays DiffServ settings on the
switch.
Removes all IGMP information.
Resets a TCP connection. Use
the
get the Session ID.
Clears the MAC address table.
Removes all learned MAC
address on the specified port(s).
Resets to the factory default
settings.
show ip tcp command to
Chapter 31 Introducing Commands
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13