ZyXEL Communications ZyXEL Dimension ES-2048 User Manual page 53

Table 5 Navigation Panel Links (continued)
LINK
IP Setup
Port Setup
Advanced
Application
VLAN
Static MAC
Forwarding
Filtering
Spanning Tree
Protocol
Bandwidth
Control
Broadcast Storm
Control
Mirroring
Link Aggregation This link takes you to a screen where you can logically aggregate physical links to
Port
Authentication
Port Security
Queuing Method
Multicast
DHCP Relay
Routing Protocol
Static Routing
DiffServ
Management
Maintenance
Access Control
Diagnostic
Chapter 4 The Web Configurator
DESCRIPTION
This link takes you to a screen where you can configure the management IP
address, subnet mask (necessary for switch management) and DNS (domain name
server).
This link takes you to screens where you can configure settings for individual switch
ports.
This link takes you to screens where you can configure port-based or 802.1Q VLAN
(depending on what you configured in the Switch Setup menu). You can also
configure protocol-based VLANs.
This link takes you to screens where you can configure static MAC addresses for a
port. These static MAC addresses do not age out.
This link takes you to a screen to set up filtering rules.
This link takes you to screens where you can configure the STP/RSTP to prevent
network loops.
This link takes you to screens where you can cap the maximum incoming bandwidth
allowed on specified port(s).
This link takes you to a screen to set up broadcast filters.
This link takes you to screens where you can copy traffic from one port or ports to
another port in order that you can examine the traffic from the first port without
interference
form one logical, higher-bandwidth link.
This link takes you to a screen where you can configure RADIUS (Remote
Authentication Dial-In User Service), a protocol for user authentication that allows
you to use an external server to validate an unlimited number of users.
This link takes you to a screen where you can activate maximum port security
through the use of configured static MAC addresses.
This link takes you to a screen where you can configure strictly priority or weighted
fair scheduling with associated queue weights for each port.
This link takes you to a screen where you can configure various multicast features
and create multicast VLANs.
This link takes you to a screen where you can configure DHCP relay information
and specify the DHCP server(s).
This link takes you to screens where you can configure static routes. A static route
defines how the switch should forward traffic by configuring the TCP/IP parameters
manually.
This link takes you to screens where you can configure DiffServ and DSCP settings.
This link takes you to screens where you can perform firmware and configuration
file maintenance as well as reboot the system.
This link takes you to screens where you can change the system login password
and configure SNMP and remote management.
This link takes you to screens where you can view system logs and test port(s).
ES-2048 User's Guide
51