Figure 43 Static Mac Forwarding; Table 20 Static Mac Forwarding - ZyXEL Communications ZyXEL Dimension ES-2048 User Manual

ES-2048 User's Guide

Figure 43 Static MAC Forwarding

The following table describes the labels in this screen.

Table 20 Static MAC Forwarding

LABEL
Active
Name
MAC Address
VID
Port
Add
Cancel
Clear
Index
Active
Name
MAC Address
VID
Port
100
DESCRIPTION
Select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by clearing this check box.
Enter a descriptive name for identification purposes for this static MAC address
forwarding rule.
Enter the MAC address in valid MAC address format, that is, six hexadecimal
character pairs.
Note: Static MAC addresses do not age out.
Enter the VLAN identification number.
Enter the port where the MAC address entered in the previous field will be
automatically forwarded.
Click Add to save your rule to the switch's run-time memory. The switch loses this rule
if it is turned off or loses power, so use the Save link on the top navigation panel to
save your changes to the non-volatile memory when you are done configuring.
Click Cancel to reset the fields.
Click Clear to begin configuring this screen afresh.
Click an index number to modify a static MAC address rule for a port.
This field displays whether this static MAC address forwarding rule is active (Yes) or
not (No). You may temporarily deactivate a rule without deleting it.
This field displays the descriptive name for identification purposes for this static MAC
address-forwarding rule.
This field displays the MAC address that will be forwarded and the VLAN identification
number to which the MAC address belongs.
This field displays the ID number of the VLAN group.
This field displays the port where the MAC address shown in the next field will be
forwarded.
Chapter 9 Static MAC Forwarding