Mvr Configuration Example; Figure 65 Mvr Configuration Example - ZyXEL Communications ZyXEL Dimension ES-2048 User Manual

ES-2048 User's Guide
Table 43 MVR: Group Configuration
LABEL
Name
Start Address
End Address
Delete
Cancel

19.7.1 MVR Configuration Example

The following figure shows a network example where ports 1, 2 and 3 on the switch belong to
VLAN 1. In addition, port 7 belongs to the multicast group with VID 200 to receive multicast
traffic (the News and Movie channels) from the remote streaming media server, S. Computers
A, B and C in VLAN 1 are able to receive the traffic.

Figure 65 MVR Configuration Example

To configure the MVR settings on the switch, create a multicast group in the MVR screen and
set the receiver and source ports.
156
DESCRIPTION
This field displays the descriptive name for this setting.
This field displays the starting IP address of the multicast group.
This field displays the ending IP address of the multicast group.
Select Delete All and click Delete to remove all entries from the table.
Select Delete Group and click Delete to remove the selected entry(ies) from the table.
Select Cancel to clear the checkbox(es) in the table.
Chapter 19 Multicast