Using Command History; Saving Your Configuration; Switch Configuration File - ZyXEL Communications ZyXEL Dimension ES-2048 User Manual

Enter
<command> ?
parameters.
sysname> ping ?
<ip|host-name>
help
sysname>

31.9 Using Command History

The switch keeps a list of recently used commands available to you for reuse. You can use any
commands in the history again by pressing the up ( ) or down ( ) arrow key to scroll through
the previously used commands and press
of commands.
sysname> history
enable
exit
show ip
history
sysname>

31.10 Saving Your Configuration

After you set the switch settings with the configuration commands, use the
command to save the changes permanently.
Note: The
You must save your changes after each CLI session. All unsaved configuration
changes are lost once you restart the switch.
sysname# write memory

31.10.1 Switch Configuration File

When you configure the switch using either the CLI (Command Line Interface) or web
configurator, the settings are saved as a series of commands in a configuration file on the
switch. You can perform the following with a configuration file:
• Back up switch configuration once the switch is set up to work in your network.
• Restore switch configuration.
Chapter 31 Introducing Commands
to display detailed help information about the sub commands and
command is not available in User mode.
write memory
destination ip address
Description of ping help
. Use the history command to display the list
[ENTER]
ES-2048 User's Guide
write memory
217