Table of Contents
Advertisement
SECTION 4: OPERATIONS
Operation Overview
The purpose of this overview is to provide the nov-
ice machine operator with a basic understanding
of how the machine is used during operation, so
the machine controls/components discussed later
in this manual are easier to understand.
Due to the generic nature of this overview, it is
not intended to be an instructional guide. To learn
more about specific operations, read this entire
manual, seek additional training from experienced
machine operators, and do additional research
outside of this manual by reading "how-to" books,
trade magazines, or websites.
To reduce your risk of
serious injury, read this
entire
using machine.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when operating this machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
Model G0938 (Mfd. Since 03/21)
manual
BEFORE
To complete a typical operation, the operator
does the following:
1.
Examines workpiece to make sure it is suit-
able for cutting.
2.
Rotates variable speed knob all the way
counterclockwise.
3.
Adjusts table tilt, if necessary, to angle of
desired cut.
4.
Adjusts hold-down shoe to just clear
workpiece.
5.
Checks to make sure workpiece can safely
pass all the way through blade without inter-
ference from other objects.
6.
Puts on safety glasses and respirator.
7.
Starts dust collector and turns machine ON.
8.
Rotates variable-speed knob to appropriate
speed needed for workpiece.
9.
Holds workpiece firmly and flat against table
and then pushes workpiece into blade at
a steady and controlled rate until cut is
complete.
10. Rotates variable-speed knob all the way
counterclockwise.
11. Turns machine OFF, then turns dust collector
OFF.
-19-
Advertisement
Table of Contents
