Lan Port; Figure 15: Pin Layout For The Rj45 Connector On The Lan Port; Table 8. Lan Port Specifications; Table 9. Mdi Pin Signals (10Base-T Or 100Base-Tx) - Allied Telesis AT-AP500 Installation Manual

LAN Port

Draft 11-11-2016

Table 8. LAN Port Specifications

Connector
Standards
PoE standard
Figure 15 illustrates the pin layout of the LAN port.
Figure 15. Pin Layout for the RJ45 Connector on the LAN Port
Table 9 lists the pin signals when the port is operating in the MDI
configuration at 10 or 100 Mbps.

Table 9. MDI Pin Signals (10Base-T or 100Base-TX)

AT-AP500 Wireless Access Point Installation Guide
RJ45
IEEE 802.3 (10Base-T)
IEEE 802.3u (100Base-TX)
IEEE 802.3ab (1000Base-T)
IEEE 802.3at (class 4)
Pin Signal
1 TX+
2 TX-
3 RX+
6 RX-
35