Remote control
Safety
Danger due to incorrect operation.
This can result in severe personal injury and damage to property.
▶
▶
Danger of electric shock!
This can result in severe personal injury and damage to property.
▶
▶
General
A remote control is useful as soon as you want to make adjustments directly from the
welding station. Special remote control cables in lengths of 5 or 10 m (197 or 394 in.)
connect the remote control to the power source.
The following remote control types are available:
-
-
-
-
-
AC remote con-
The AC remote control TR 53mc is especially suitable for TIG AC welding operation.
trol TR 53mc
The following welding parameters can be set via the remote control:
-
-
-
AC remote control TR53 mc
WARNING!
Read and understand these Operating Instructions
Read and understand all the Operating Instructions for the system components,
especially the safety rules
WARNING!
Only carry out work on the device if the power switch is in the "O" position,
and the device has been disconnected from the grid.
TIG and MMA remote control (AC) TR53mc
MMA and TIG remote control (DC) TPmc
TIG pulse remote control (AC/DC) TR50mc
TIG spot welding remote control (DC) TR51mc
TIG foot controller (AC/DC) TR52mc
Main welding current IH
AC balance
AC frequency
(1)
(2)
(3)
49