Remote" Control Panel; General - Fronius TransSteel 3500 Operating Instructions Manual

"Remote" control panel

General

The "Remote" control panel is fitted as a standard part of the power source. The power
source is operated from the control panel on the wire-feed unit.
The "Remote" power source can be operated via the following system add-ons:
-
-
-
Remote control
panel
Remote control panel
No.
(1)
(2)
(3)
30
Remote control units
Wire-feed unit
Welding torch
Function
Overtemperature indicator
Lights up if the power source overheats (e.g. because the duty cycle has been ex-
ceeded). For more information on this, see the "Troubleshooting" section.
Error indicator
Lights up if an error occurs. The corresponding service code is displayed on all de-
vices connected to the LocalNet that have a digital display.
Power source ON indicator
Lights up when the mains cable is plugged into the mains and the mains switch is
in the - I - position
R E MOT E
(1)
(2)
(3)