Harman Martin RUSH MH 10 Beam FX User Manual page 8

applied, when the product receives a DMX signal, or when certain
control menu items are selected.
The fixture falls into the following Risk Groups according to
EN62471 at the distances indicated below:
19.8 m 212.4 m
(65.0 ft.) (697 ft.)
RISK GROUP RISK GROUP RISK GROUP
2 1
EXEMPT
Protection from injury
Fasten the fixture securely to a fixed surface or structure when in
use. The fixture is not portable when installed.
Ensure that any supporting structure and/or hardware used can
hold at least 10 times the weight of all the devices they support.
If suspending from a rigging structure, fasten the fixture to a
rigging clamp. Do not use safety cables as the primary means of
support.
If the fixture is installed in a location where it may cause injury or
damage if it falls, install as directed in this manual a secondary
attachment such as a safety cable that will hold the fixture if a
primary attachment fails. The secondary attachment must be
approved by an official body such as TÜV as a safety attachment
for the weight that it secures, must comply with EN 60598-2-17
Section 17.6.6 and must be capable of bearing a
static suspended load that is ten times the weight of the fixture and
all installed accessories.
Allow enough clearance around the head to ensure that it cannot
collide with an object or another fixture when it moves.
Check that all external covers and rigging hardware are securely
fastened.
Block access below the work area and work from a stable platform
whenever installing, servicing or moving the fixture.
Do not operate the fixture with missing or damaged covers, shields
or any optical component.
Do not lift or carry the fixture by its head. Support the fixture by its
base only.
8 RUSH™ MH10 Beam FX User Manual