Effects; Pan And Tilt - Harman Martin RUSH MH 10 Beam FX User Manual

Effects

See 'DMX protocol' on page 32 for a full list of the DMX channels and values
required to control the different effects.

Pan and tilt

The fixture's head can be rotated continuously on both pan and tilt axes, or
can be positioned through 540° of pan and 270° of tilt with 16-bit coarse and
fine control. Using the control menus it is possible to invert pan or tilt
movement.
To set fixed positions for pan or tilt, ensure that the corresponding Rotation
control channel is set to zero.
The fixture incorporates pan and tilt feedback, so that if a pan or tilt position
error is detected or the fixture is knocked out of position, the shutter closes
and the fixture resets to the correct pan & tilt position.
Pan/tilt options
Using the Special Function control channel (ch15) you can configure various
pan/tilt options. Return the Special Function channel to zero to resume normal
DMX control. If a delay time is set in the "Function Delay" setting then you
need to add this time to the time below.
Auto-blackout: Light output will be blacked out when the head moves.
•
On: hold Special Function between 145-149 for 1 second.
•
Off (default): hold Special Function between 150-154 for 1 second.
Pan-Tilt speed: Sets the maximum speed for pan-tilt.
•
Fast (default): hold Special Function between 80-84 for 1 second.
•
Smooth: hold Special Function between 85-89 for 1 second.
Adjust Pan-Tilt home position (calibration): follow this sequence.
1. Hold Special Function channel between 55-59 for 5 seconds.
2. Set desired Pan and/or Tilt position using the pan/tilt DMX channels.
3. Hold Special Function channel between 165-169 for 5 seconds to store
the settings.
4. Return Special Function channel to zero.
Reset Pan-Tilt home position to factory default: hold Special Function
channel between 245-249 for 5 seconds.
28 RUSH™ MH10 Beam FX User Manual