Harman Martin RUSH MH 10 Beam FX User Manual page 12

3. The fixture is supplied with an omega-type bracket to which a rigging
clamp can be attached. Bolt a rigging clamp securely to the bracket. The
bolt used must be M12, grade 8.8 steel minimum, and fastened with a self-
locking nut.
4. Fasten the omega bracket to mounting holes A on
the base of the fixture using the bracket's quarter-
turn fasteners. Turn quarter-turn fasteners a full 90°
to lock them (see illustration on right).
5. Working from a stable platform, hang
the fixture vertically on the truss and
fasten the rigging clamp onto the
truss.
6. Secure the fixture with a safety cable
through attachment points B as
directed below.
7. Check that the head will not collide
with other fixtures or objects.
Securing with a safety cable
Secure the fixture with a safety cable (or
other secondary attachment) that is
approved for the weight of the fixture so
that the safety cable will hold the fixture if
the primary attachment fails. Loop the
safety cable through one of the two
attachment points B in the base of the
fixture base (see illustrations above and to
right) and around a secure anchoring
point.
If a safety cable attachment point
becomes damaged or deformed, do not
use the fixture. Return it to a Martin
Service Centre for repair.
12 RUSH™ MH10 Beam FX User Manual
A
B
A
B