Linking Fixtures To Power In A Chain - Harman Martin RUSH MH 10 Beam FX User Manual

Linking fixtures to power in a chain

The mains power input cable supplied with the fixture is rated 6 A and can
safely supply enough power for one fixture only. If you want to use the MAINS
OUT socket on the fixture to link power to another fixture in a daisy-chain, you
must obtain the larger power input cables and power link cables available as
an accessory from Martin (see 'Accessories' on page 48).
Using the 14 AWG or 1.5mm
•
Maximum nine (9) MH 10 fixtures in total at 100-120 V, or
•
Maximum nineteen (19) MH 10 fixtures in total at 200-240 V.
If you install a power plug on the 14 AWG / 1.5 mm
a grounding type (earthed) plug with integral cable grip that is rated 16 A
minimum, 250 V.
14
2
cables from Martin®, you can link:
RUSH™ MH10 Beam FX User Manual
2 power input cable, install