Harman Martin RUSH MH 10 Beam FX User Manual page 47

Control and Programming
Control options .................................... DMX, RDM, stand-alone, master/slave
DMX channels ..................................................................................... 24 or 93
Stand-alone trigger options ................................................ Music trig, auto trig
Stand-alone memory ........................................................................... 4 shows
Setting and addressing ........................ Control panel with backlit LCD display
Pan and tilt speed................... Adjustable via onboard control panel and DMX
DMX compliance ............................................................ USITT DMX512/1990
RDM compliance ................................................................. ANSI/ESTA E.120
Construction
Color ......................................................................................................... Black
Housing .......................................... High impact flame retardant thermoplastic
IP rating .................................................................................................... IP 20
Installation
Mounting points ............................. One quarter-turn bracket for rigging clamp
Location ................ Dry location only, must be fastened to surface or structure
Orientation ...................................................................................................Any
Minimum distance to illuminated surfaces ................................ 200 mm (8 in.)
Minimum distance to combustible materials ............................. 100 mm (4 in.)
Minimum clearance around fans and vents .............................. 100 mm (4 in.)
Connections
AC power input/output ........................................... Neutrik powerCON TRUE1
DMX/RDM data in/out .............................................. 3-pin & 5-pin locking XLR
Electrical
AC power ............................................................ 100-240 V nominal, 50/60 Hz
Power supply unit ................................... Auto-ranging electronic switch mode
Fuse ...................................................................................................... T 2.0 A
Typical power and current
120 V, 60 Hz ................................................................. 0.85 A, 100W, PF 0.99
230 V, 50 Hz ................................................................. 0.49 A, 108W. PF 0.99
Measurements made at nominal voltage with all LEDs at full intensity. Allow
for a deviation of +/- 10%.
Approvals
EU safety ....................... EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
EU EMC ............................................... EN 55015; EN 55032; EN 55103-1,-2;
US safety ............................................................................................. UL 1573
EN 61000-3-2,-3; EN 61000-4-2, -4, -5; EN 61547
RUSH™ MH10 Beam FX User Manual 47