Table of Contents
Advertisement
Maintenance
Warning! Read 'Safety information' on page 5 before
servicing the fixture.
There are no user serviceable parts inside the fixture. Do not
open the housing. Refer any service operation not described in
this user manual to a qualified service technician.
Disconnect the fixture from mains power before cleaning or
servicing.
Service fixtures in an area where there is no risk of injury from
failing parts, tools or other materials.
The user may carry out the service operations described in this manual. All
other service operations must be carried out by an authorized Martin® service
technician. Do not try to repair the fixture yourself, as you may create a safety
risk or cause damage that is not covered by the product warranty.
Installation, on-site service and maintenance can be provided worldwide by the
Martin Professional™ Global Service organization and its approved agents,
giving owners access to Martin's expertise and product knowledge in a
partnership that will ensure the highest level of performance throughout the
product's lifetime. Please contact Martin® for details.
Cleaning
Excessive dust, smoke fluid, and particle buildup degrades performance,
causes overheating and will damage the fixture. Damage caused by
inadequate cleaning or maintenance is not covered by the product warranty.
The cleaning of external optical lenses must be carried out periodically to
optimize light output. Cleaning schedules for lighting fixtures vary greatly
depending on the operating environment. It is therefore impossible to specify
precise cleaning intervals for the fixture. Environmental factors that may result
in a need for frequent cleaning include:
•
Use of smoke or fog machines.
•
High airflow rates (near air conditioning vents, for example).
•
Presence of cigarette smoke.
•
Airborne dust (from stage effects, building structures and fittings or the
natural environment at outdoor events, for example).
If one or more of these factors is present, inspect fixtures within their first 100
hours of operation to see whether cleaning is necessary. Check again at
frequent intervals. This procedure will allow you to assess cleaning
requirements in your particular situation. If in doubt, consult your Martin dealer
about a suitable maintenance schedule.
30
RUSH™ MH10 Beam FX User Manual
Advertisement
Table of Contents
