Serial Settings; Port; Figure 3.16 Serial Settings > Port 1/Port 2 - Advantech EKI-1242OUMS User Manual

Item
Subnet Mask
Gateway
3.4

Serial Settings

3.4.1

Port

To access this page, click Serial Settings > Port 1/Port 2.
The following figure displays the menu as found in the EKI-1242BNMS/EKI-
1242IBNMS port 2 (Modbus), EKI-1242ECMS/EKI-1242IECMS, EKI-1242EIMS/EKI-
1242IEIMS, EKI-1242PNMS/EKI-1242IPNMS and EKI-1242OUMS/EKI-
1242IOUMS.
,
The following table describes the items in the previous figure.
Item
Type
Baud Rate
Parity
Data Bits
Stop Bits
Flow Control
Submit
EKI-1242 Series User Manual
Description
Enter a value to specify the IP subnet mask for the interface. The
default is 255.255.255.0.
Enter a value to specify the default gateway for the interface. The
default is 192.168.1.254.
Figure 3.16 Serial Settings > Port 1/Port 2
Description
Click the drop-down menu to select a serial interface: RS232, RS422
or RS485.
Enter a value to specify the baud rate. The value should conform to
the current transmission speeds of connected devices when setting
the baud rate.
Click the drop-down menu to select the parity: None, Odd, Even, Mark
or Space.
Click the drop-down menu to select the data bits: 5, 6, 7, or 8.
Click the drop-down menu to select the stop bits: 1, 1.5 or 2.
Click the drop-down menu to select the flow control mode: None,
XOn/XOff or RTS/CTS.
Click Submit to save the values and update the screen.
44