Serial Settings; Port; Figure 3.5 Serial Settings > Port 1/Port 2 - Advantech EKI-1242NR Series User Manual

Item
Subnet Mask
Gateway
Ethernet Group 2 IP Address Setting
Mode
IP Address
Subnet Mask
Gateway
Ethernet Group 1
and Ethernet Group
2 interface use the
same IP address
setting
Submit
3.4

Serial Settings

The Serial Setting menu allows you to configure the serial interface type and flow
control for ports.
3.4.1

Port

To access this page, click Serial Settings > Port 1/Port 2.
The following table describes the items in the previous figure.
Item
Name
EKI-1242NR Series User Manual
Description
Enter a value to specify the IP subnet mask for the interface. The
default is 255.255.255.0.
Enter a value to specify the default gateway for the interface. The
default is 192.168.1.254.
Click the drop-down menu to select the IP Address Setting mode:
Static address or DHCP client.
Enter a value to specify the IP address of the interface. The default is
192.168.1.1.
Enter a value to specify the IP subnet mask for the interface. The
default is 255.255.255.0.
Enter a value to specify the default gateway for the interface. The
default is 192.168.1.254.
Check the option to use same IP address setting on Ethernet Group 1
and Ethernet Group 2 interfaces. In this mode, the Ethernet ports of
Ethernet Group 1 and Ethernet Group 2 are bridged, so the traffic can
be forwarded between these interfaces.
Unchecked the option to use two different IP subnet on Ethernet
Group 1 and Ethernet Group 2 interfaces. In this mode, the Ethernet
Group of Ethernet Group 1 and Ethernet Group 2 are not bridged, so
the traffic can't be forwarded between these interfaces.
Click Submit to save the values and update the screen.
Figure 3.5 Serial Settings > Port 1/Port 2
Description
Display the name of the serial port. Use the name in the Serial
Settings > Port 1/Port 2 to create a serial input or serial output in
Node-RED.
25