3.4
Serial Settings
3.4.1
Port
To access this page, click Serial Settings > Port 1/Port 2.
The following table describes the items in the previous figure.
Item
Type
Baud Rate
Parity
Data Bits
Stop Bits
Flow Control
Submit
Figure 3.13 Serial Settings > Port 1/Port 2
Description
Click the drop-down menu to select a serial interface: RS232, RS422
or RS485.
Enter a value to specify the baud rate. The value should conform to
the current transmission speeds of connected devices when setting
the baud rate.
Click the drop-down menu to select the parity: None, Odd, Even, Mark
or Space.
Click the drop-down menu to select the data bits: 5, 6, 7, or 8.
Click the drop-down menu to select the stop bits: 1, 1.5 or 2.
Click the drop-down menu to select the flow control mode: None,
XOn/XOff or RTS/CTS.
Click Submit to save the values and update the screen.
37
EKI-1242 Series User Manual