Known Issues
B
S
10.1.2-20080214F
LUE
CALE
This release resolves an issue with option keys for enabling Shared Library
Services (SLS).
Resolved Issue
Using an option key to enable Shared Library Services (SLS) for
configuring partitions now operates correctly.
December 2008
Problem: Using certain robotic motion diagnostic tests cause the
robotics to freeze. The affected diagnostics include the following:
Move TeraPack Case To Shelf Test
Shelf Sensor Test
Work-around: Avoid using robotic motion diagnostic tests unless
specifically instructed to do so by SpectraGuard Technical Support.
Problem: When configuring Rotation Manager, the option for Iron
Mountain is grayed out.
Work-around: None.
Problem: With Rotation Manager enabled, performing a TeraPack
export operation but not actually removing the TeraPack results in an
incorrect email message stating that the TeraPack and its contents were
removed from the library.
Work-around: Ignore the email.
Problem: The BlueScale interface currently allows you to configure
RXT drives in drive bays 3 and 4 of the optional second DBA. However,
the library does not support RXT drives in these positions.
Work-around: Do not install RXT drives in the top two drive bays of
the second DBA, if present.
Problem: When creating a direct-attach SCSI partition, the default SCSI
ID displayed for each drive is 255. This SCSI ID is invalid.
Work-around: Set the SCSI ID for each drive to a unique value between
0 and 15.
BlueScale10.1.2-20080214F
T200, T380, and T680 Libraries
47
Need help?
Do you have a question about the T-Series Spectra T200 and is the answer not in the manual?