Bluescale10.4.0-20080903F - Spectra Logic T-Series Spectra T200 Release Note

Problem
The default partition name for a cleaning
partition is not always set to Clean n, where n is
a number.
Advanced Import/Export screen for a cleaning
partition shows TAP > EE and EE > TAP as
possible destinations.
Unclear system message generated when
AutoSupport attempts to send a support ticket
to autosupport@spectralogic.com email
recipient when the SMTP IP address is set to
0.0.0.0.
B S 10.4.0-20080903F
LUE CALE
Starting with the BlueScale10.4.0 firmware, IBM LTO-4 tape drives must be using
Caution
firmware version 8940 or later.
If you plan to upgrade the Fibre Channel tape drives in your library from LTO-3 to
Important
LTO-4, read
on page 19
World Wide Node Name (WWNN) and World Wide Port Names (WWPN) for LTO-4
Fibre Channel drives will affect your SAN or HBA configurations.
The IBM LTO-4 Fibre Channel drives currently shipping with the library are
Important
equipped two Fibre Channel ports. Read
Drives on page 21
If an LTO-4 Fibre Channel drive is connected to a SAN using zoning or to an HBA
using persistent binding, you may also need to update your SAN or HBA
configuration to include the WWPN for Port B, as described in
December 2008
Automatic Drive Cleaning
AutoSupport
Changes to SAN or HBA Configurations for LTO-4 Fibre Channel Drives
for important information. Changes to the way a library generates the
for important information. To enable and use the dual ports:
Your library must be using BlueScale10.4.0 or later firmware.
The LTO-4 Fibre Channel drives must be using firmware version 8940 or later
(see Updates to the LTO-4 Drive Firmware on page
Workaround
Enter a name for the cleaning partition that will
make it easy to identify.
The cleaning partition does not have an entry/exit
pool. Do not select either of these options; the
move will fail.
Set the autosupport@spectralogic.com SMTP
address.
1. From the toolbar, go to Menu > Configuration
> Mail Users.
2. Select Edit next to the autosupport address.
3. Set the SMTP address to the address of your
mail server and select Save.
Using Dual-Port Fibre Channel LTO-4 Tape
16).
T200, T380, and T680 Libraries

BlueScale10.4.0-20080903F

Step 4 on page 20.
41