Spectra Logic Spectra 12000 User Manual page 79

8. click on the square box next to the TAOS enabled device to check-
mark each TAOS enabled device you want installed (Figure 7-11).
Figure 7-11 Device Discovery on the TAOS ITP
Configuration control panel, with the device selected.
9. Click on the + symbol to display all the devices located within the
TAOS enabled device and verify all devices are checked.
10. Press Install.
11. A dialog box displays, reading Installation Complete. Click OK.
12. Click Close to close the TAOS ITP Configuration window.
Chapter 7. Configuring the Spectra 12000 E-QIP 79