Spectra Logic Spectra 12000 User Manual page 143

7. Slide the filter assembly up and out from the door to disengage the
four metal hooks.
8. Inspect the filter and replace it if necessary.
9. Remove the old filter by pulling it out from under the six tabs on the
filter bracket.
10. Slide the new filter under the four tabs, so that the filtered side is
facing the door, and the plastic side is facing the chassis. Ensure the
filter is centered in the bracket and is covering all the hexagonal
cutouts.
11. Align the four hooks on the filter bracket with the four slots on the
door and slide the filter assembly down until it is engaged with the
door.
12. Screw down the two screws into the door, making sure all four hooks
are fully engaged with the door.
13. Close the front door and use the key to lock the door.
Chapter 11. Maintaining the Spectra 12000 Library 143