To Enable Cod - Spectra Logic Spectra 12000 User Manual

To enable CoD

1. From the General Status screen, tap Robotics. The System Setup
screen appears (Figure 11-9).
Figure 11-9 The System Setup screen.
2. To enable CoD, you will need to obtain an enablement key from
Spectra Logic. Contact Spectra Logic with the serial number of the
device, as displayed in the Serial # field, to obtain the activation key.
3. Tap the blank field to the right of Submit Key.
4. A virtual keyboard appears. Enter the key.
5. Tap OK on the virtual keyboard.
6. Tap Submit Key.
Chapter 11. Maintaining the Spectra 12000 Library 155