Taos Itp Driver Installation - Spectra Logic Spectra 12000 User Manual

[2] Add secured IP range: If you have set ITP security, use this option to add a
secured IP range. If security is turned on, the E-QIP will only respond to
hosts in the secured IP address range(s).
[3] Delete secured IP range: Use this option to delete a secured IP range.
[4] Clear all secured IP ranges: Use this to clear all IP ranges you have secured.
[?] Help: Displays help for this menu.
[Esc] Returns you to the main menu

TAOS ITP Driver Installation

Note: Operating system information is documented in the
following chapters. This information is provided only as a
convenience; refer to your operating system for the most
current information. If your operating system is not
included in this guide, use the installation instructions
provided in their documentation.
Š
To install TAOS ITP on Windows NT, turn to Installing TAOS ITP on
Windows NT on page 74.
Š
To install TAOS ITP on Windows 2000, turn to Installing TAOS ITP
on Windows 2000 on page 81.
Š
To install TAOS ITP on Solaris, turn to Installing TAOS ITP on Solaris
on page 96.
Š
To install TAOS ITP on Linux, turn to Installing TAOS ITP on Linux
on page 98.
Chapter 7. Configuring the Spectra 12000 E-QIP 73