Configuration Toolbar - Spectra Logic Spectra 12000 User Manual

24 Spectra 12000 User Guide

Configuration Toolbar

Use the Configuration toolbar to configure the library:
Partition Shows partition status. This lets you set up and
alter library partitions, assign drives to each partition,
assign the number of slots, and name the partition.
Drive Config Shows drive configuration information, and lets
you configure drives. Drive information includes the
emulation of the drive, the firmware level, and the SCSI
ID assigned to each drive. Use this to remove drives or
replace them in case of drive problems.
Controller This shows QIP information and lets you
configure controllers.
Help This button displays online help for the Library
Controller.
Figure 1-7
Configuration
toolbar.