Spectra Logic Spectra 12000 User Manual page 150

150 Spectra 12000 User Guide
2. Go to the rear panel of the library. Have the new QIP ready. Align it
to ride inside the top and bottom rails. Push firmly into place.
3. Tighten the two captive screws.
4. Connect cabling, as described in Connecting the SCSI Cables and
Terminators on page 32.
5. Configure the QIPs:
Š
If an S-QIP turn to Configuring the Spectra 12000 S-QIP on page 47.
Š
If an F-QIP turn to Configuring the Spectra 12000 Library F-QIP on
page 55.
Š
If an E-QIP turn to Configuring the Spectra 12000 E-QIP on page 65.
Figure 11-8 Adding a QIP.