Fuel Tank - Hisun HS 250UTV Owner's/Operator's Manual

Hide thumbs Also See for HS 250UTV:
Table of Contents

Advertisement

Introduction HS 200UTV/HS 250UTV
■Rear End
Jack the rear only after placing a wooden block
under the right and left frame tubes for securing
the engine and then supporting it.
Do not apply jack pressure on the steel plate
directly under the engine.
[1] Jack
PRE-OPERATION CHECK
For your own safety and maximum service life
of the vehicle, make a thorough daily inspection
before starting the engine or operating the
vehicle.
CAUTION
To avoid personal injury:
Be sure to check and service the vehicle
on a flat surface with the engine off and
the parking brake "ON".
■Walk Around Inspection
Look around and under the vehicle for such
items as loose bolts, trash build-up, oil or
coolant leaks, broken or worn parts.
■Checking and Refueling
CAUTION
To avoid personal injury:
Do not smoke while refueling.
Be sure to stop the engine before
refueling.
Turn the key switch to "ON", check the
1.
amount of fuel by the fuel gauge.
2.
Fill fuel tank when fuel gauge shows1/4
or less fuel in the tank.
[1] Fuel cap
Fuel tank capacity
IMPORTANT
If oil level is low, do not run the engine.
Checking engine oil level
1.
Park the vehicle on a flat surface, raise
the cargo bed if applicable, apply the
parking brake, and shut off engine.
1-36
13.5L

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hs 200utv

Table of Contents