2. Selecting light switch position.
■ Head Light Switch
Turn on the key switch, head light on.
NOTE:
Turn on the key switch causes the following
lamps to light simultaneously.
1.
Tail lights (lamps at the rear portions of the
vehicle)
2.
Dashboard background Light
3.
Front left and right position lights
① High beam lights "ON"
② Low beam lights "ON"
Winch cable release
③
Operating the Vehicle
8-2
Winch cable pulled up
④
Emergency light "ON"
⑤
Emergency light "OFF"
⑥
Left turning lights
⑦
Right turning lights
⑧
■ Emergency Light Switch
Press the top half of the emergency light
switch, the light flash along with the indicator
on the instrument panel. Press the bottom half
of the emergency light switch to turn off the
light.
Note:
The emergency light switch will operate
when the key switch is in the "ON" position
and "OFF" position. Keeping the switch
"ON" causes the battery to run out.
■ Turn Signal Light Switch
To indicate a right turn, push on the lower half
of the turn toggle switch.
To indicate a left turn, push on the upper half
of the turn toggle switch.
When the left or right signal is activated, the
indicated turning light will flash and the other
will stay on.
The indicator lamp at the instrument panel also
flashes indicating the direction of the turn.
NOTE:
The turn signal light switch is only
operative when the key switch is in the
ON" position.
If the emergency light switch is pressed to
the "ON" position while the turn signal is