Reset Wi-Fi Credentials; Reconnect To Wi-Fi - Raypak AVIA 264A Installation And Operation Manual

Reset Wi-Fi Credentials

Resetting the Wi-Fi is useful when the heater is trying to
connect to a Wi-Fi signal that is not available or has been
changed.
NOTE: After resetting Wi-Fi credentials, the heater
needs to be manually connected again to Wi-Fi to work
with Raymote features. Ensure to reconnect as existing
unit in Raymote app or add it as a new device.
1. Press and hold the CONNECT key for 5 to 10
seconds.
Figure 115. Wi-Fi Reset – Press and Hold CONNECT
2. The Display shows "Reset Wi-Fi?" in the top row and
"No" in the second row.
3. To cancel and exit, press MODE.
Figure 116. Wi-Fi Reset Menu
4. To proceed with reset, press UP key.
5. Second row now shows "Yes".
Figure 117. Wi-Fi Reset Confirmation
6. Now press Mode key to reset.
7. "Wi-Fi Initialized" message is displayed.
Figure 118. Wi-Fi Reset Completed
8. Now Connect again or reconfigure an existing heater.

Reconnect to Wi-Fi

Follow the next steps to reconnect a Heater already
registered in Raymote, to a new Wi-Fi network or after a
change of Wi-Fi password.
1. Select the device that needs to be reconfigured.
Figure 119. Select Heater to Reconfigure
2. Press the 3-dots button on top-right corner to open
Configuration screen.
Figure 120. Open Configuration Screen
61