Accessories Screen - Raypak AVIA 264A Installation And Operation Manual

Accessories Screen

The accessories screen includes the auxiliary and extended
heater controls in the Raymote mobile app. These controls
allow users to command an Auxiliary relay that can be
wired to turn on and off a pump, lights or water features.
When unit is equipped with Water Chemistry board, up to
3 auxiliary outputs can be controlled.
This screen also provides control to Raypak Protege
variable speed pump when connected to the heater. See
Figure 114.
WARNING: Only authorized users have access to
A
remotely control the heater, do not provide credentials
to unauthorized users.
A WARNING: Check
section for details of wiring and rating of the built-in
auxiliary relay.
Some controls are application dependent and may not be
available on all units. When a control or set of controls are
not available, these will be grayed out.
Raymote controls will reflect the actual status of the value
on the local unit. When a change is applied to any control
item, the position of the selector will reflect the confirmation
value of the setting. See Figure 114.
60
"Auxiliary Output Control"
Figure 114. Accessories Screen
NOTE: Use your smartphone camera to open QR link
below to access the latest instructions and detailed
technical support for Raymote and AVIA.