Automation; Mode Screen - Raypak AVIA 264A Installation And Operation Manual

At the bottom of the welcome screen is the notification
access point. By pressing this icon, users can access a
summary of alerts and events for a given time frame, for all
the registered units. See Figure 110.
Figure 110. Notification Screen
Alerts, events and diagnostic notifications are listed, with
different colors for easy identification.
• Green – Device online
• Blue - OTA (Over The Air) update performed
• Yellow – Diagnostic warning
• Black – Device offline
• Red – Faults and Warnings notifications
Each event can be selected to provide quick access to the
mobile view page of the unit that presented the incident.
Raymote Automation
Raymote automation offers the ability to select heater
functions and customize a specific condition that could
trigger a notification, or a control command like "operation
mode" or "set point", programmed by schedule or triggered
by a user-defined condition. See Figure 111 and Figure
112.
Figure 111. Automation
Figure 112. Automation Options
Pool-Spa Mode Screen
The Mode Screen contains the main controls for the
heater. Operation mode and setpoint can be selected from
this screen.
This screen also provides the water temperature sensed
by the heater, as well as its current operation status. See
Figure 113.
NOTE: When OFF is selected, the setpoint slider is
disabled.
NOTE: When unit is controlled with wired remote
control, the operation options OFF, Pool and Spa are
disabled in the App.
Figure 113. Heater Controls
59