Raypak AVIA 264A Installation And Operation Manual page 57

2. Press the "Set up as new" button to enter new
identification and service information. Press the
"Apply recently used profile" button to use information
already provided. See Figure 104.
Figure 104. Device Setup as New
3. During device configuration, basic reference
information about the unit will be requested,
including service provider, site location, Pool and
Spa size. See Figure 105.
NOTE: This information can be added at any time, and
it is highly recommended to provide as much detail as
possible to facilitate ease of use and customer service.
Figure 105. Device Setup Review
After completing the Raymote configuration, the unit will
start broadcasting data to the Raymote cloud.
57