Dial Via Nametag Module - HIKVISION DS-KD8003-IME1 Quick Start Manual

Video Intercom Module Door Station·Quick Start Guide
3. Enter the Room No. of the indoor station which the main unit connected to.
You can call corresponding resident by press the call button on the main unit.

4.4.2 Dial via Nametag Module

Steps:
1. Select device, click Remote Configuration.
2. Click Intercom -> Sub Module enter the sub module configuring interface.
3. Select Nametag Module pop up the configuration window.
4. Enter Room No. information for each call button, and click Save.
57