HIKVISION DS-KD8003-IME1 Quick Start Manual page 7

Video intercom module door station
Hide thumbs Also See for DS-KD8003-IME1:
Table of Contents

Advertisement

Video Intercom Module Door Station·Quick Start Guide
Cautions
 Do not drop the device or subject it to physical shock, and do not expose it to high
electromagnetism radiation. Avoid the equipment installation on vibrations surface or
places subject to shock (ignorance can cause equipment damage).
 Do not place the device in extremely hot (refer to the specification of the device for
the detailed operating temperature), cold, dusty or damp locations, and do not
expose it to high electromagnetic radiation.
 Do not aim the device at the sun or extra bright places. A blooming or smear may
occur otherwise (which is not a malfunction however), and affecting the endurance of
sensor at the same time.
 Please use a soft and dry cloth when clean inside and outside surfaces of the device
cover, do not use alkaline detergents.
 Please keep all wrappers after unpack them for future use. In case of any failure
occurred, you need to return the device to the factory with the original wrapper.
Transportation without the original wrapper may result in damage on the device and
lead to additional costs.
 Improper use or replacement of the battery may result in hazard of explosion.
Replace with the same or equivalent type only. Dispose of used batteries according to
the instructions provided by the battery manufacturer.
 The warranty does not apply to the product defects and failures arisen as a result of
improper mounting (in contradiction herewith).
 When the proper mounting instructions are not met, water might get in and destroy
the electronics.
vii

Advertisement

Table of Contents
loading

Table of Contents