HIKVISION DS-KD8003-IME1 Quick Start Manual page 41

Video Intercom Module Door Station·Quick Start Guide
3. Pull out the cables, place the installation Sticker 1 into the hole, chisel 4 screw holes
accordingly.
The suggested size of screw hole is 6 (diameter) × 25 (depth) mm.
The suggested length of cables left outside is 270 mm.
4. Remove the sticker and insert the expansion sleeves into the screw holes.
5. Fix the locating plates to the frame with screws.
6. Insert the mounting frame together with the locating plates into the hole, and fix it
with 4 expansion bolts.
The mounting frame should be placed exactly as below for this step. The tamper plate
should be at the low right of the first grid.
Figure 3-34 Install Locating Plate
Figure 3-35 Install Mounting Frame
33