HIKVISION DS-KD8003-IME1 Quick Start Manual page 29

Video Intercom Module Door Station·Quick Start Guide
The mounting frame should be placed exactly as below for this step. The tamper plate
should be at the low right of the first grid.
5. Thread the module-connecting line across the thread hole of the frame.
Pass the main unit connecting lines across the thread hole to the upper grid.
6. Connect the cables and module-connecting line to the corresponding interfaces of
the main unit, then place the main unit into the upper grid.
Connect the other end of the module-connecting line to the input interface of the
sub module.
Figure 3-15 Placement of Lines
21