HIKVISION DS-KD8003-IME1 Quick Start Manual page 24

Video Intercom Module Door Station·Quick Start Guide
1. Paste the installation Sticker A onto the wall. Make sure the sticker is placed leveled
via measuring with the gradienter.
2. Cave the installation hole along the solid line on Sticker A.
The suggested dimension of installation hole is 121(L)×111(W)×33(D) mm.
3. Pull out the cables, place Sticker 1 into the hole, chisel 4 screw holes accordingly.
The suggested size of screw hole is 6 (diameter) × 25 (depth) mm.
The suggested length of cables left outside is 100 mm.
4. Remove the sticker and insert the expansion sleeves into the screw holes.
5. Fix the locating plates to the frame with screws.
6. Insert the mounting frame together with the locating plates into the hole, and fix it
with 4 expansion bolts.
Figure 3-7 Cave the Installation Hole
Figure 3-8 Install Locating Plate
16