Video Intercom Module Door Station·Quick Start Guide
7. Pass the main unit connecting lines across the thread hole to the top grid of the left
frame.
Thread the module-connecting line (190 mm) across the thread hole of the frame.
The lines should be placed as below:
8. Connect the cables and module-connecting line 1 to the corresponding interfaces of
the main unit, then place the main unit into the upper grid.
Connect the other end of the module-connecting line1 to the input interface of the
sub module. Connect all sub modules via module-connecting lines.
Organize the line with cable tie in the package. The suggested line connection picture
as below.
Figure 3-44 Placement of Lines
41