Page 1
How to connect secure module to door station...
Page 2
1 of 4 Preparation 1. Device requirement Type Model Version Door station DS-KD8003-IME1 V2.2.3_200805 Secure module DS-K2M060 V1.0.0_160524 As an example to introduce configuration of secure module How to connect secure module to door station 1. DIP settings of secure module 1) If you need to replace the first door lock interface, turn the NO.1 digit on...
Page 3
Title: How to connect secure module to door station Version: v1.0 Date: 12/25/2020 Product: Video intercom Page: 2 of 4 Note: 1. When DIP switch is set, the original door lock interface on door station will be disabled 2. Secure module can only be used to replace the original door lock interface, if the second door is not enabled or door station doesn’t support second door, you cannot turn the second digit up 2.
Page 4
Title: How to connect secure module to door station Version: v1.0 Date: 12/25/2020 Product: Video intercom Page: 3 of 4 2) Connect power supply cable of secure module Secure module need to be supplied power separately 3) After wiring successfully, indicator of secure module will be like the following picture and RUN indicator will flick 3.
Page 5
Title: How to connect secure module to door station Version: v1.0 Date: 12/25/2020 Product: Video intercom Page: 4 of 4...
Need help?
Do you have a question about the DS-KD8003-IME1 and is the answer not in the manual?
Questions and answers