Husqvarna FS 450 2020 Owner's Manual page 45

Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position handlebar clamps.
–
1
Mount screws but do not tighten yet.
–
First bolt the handlebar clamps with screws
longer, higher side of the handlebar supports so that both
parts touch.
Guideline
Screw, handlebar
clamp
–
1
Tighten screws evenly.
Guideline
Screw, handlebar
clamp
Finishing work
–
Mount the handlebar cushion.
TUNING THE CHASSIS 10
1
onto the
M8 20 Nm (14.8 lbf ft)
M8 20 Nm (14.8 lbf ft)
43