Table of Contents
Advertisement
[TEST PATTERN] menu
On the menu screen, select [TEST PATTERN] from the main menu.
Refer to "Navigating through the menu" (x page 79) for the operation of the menu screen.
[TEST PATTERN]
Display the test pattern.
Settings such as position and size will not be reflected in test patterns. Make sure to perform various adjustments
while displaying the input image.
1)
Select the [TEST PATTERN] menu, and press the <ENTER> button.
f The [TEST PATTERN] screen (list format) is displayed.
2)
Press as to select the test pattern to display, and press the <ENTER> button.
01
02
03
04
[WINDOW(INVERSION)]
05
[COLOR BAR(VERTICAL)]
06
[COLOR BAR(HORIZONTAL)]
07
[16:9/4:3 ASPECT FRAME]
08
09
10
11
[USER TEST PATTERN 1]
12
[USER TEST PATTERN 2]
13
[USER TEST PATTERN 3]
f Selected test pattern and the [TEST PATTERN] screen (toggle selection format) are displayed.
f To change the test pattern, proceed to Step 3).
3)
Press qw to switch the test pattern.
f The test pattern will switch each time you press qw.
Note
f The [TEST PATTERN] screen (list format, toggle selection format) can be hidden by pressing the <ON SCREEN> button on the remote
control while the test pattern is displayed.
f Thumbnails of [USER TEST PATTERN 1], [USER TEST PATTERN 2], and [USER TEST PATTERN 3] are not displayed.
f The [ALL BLACK] screen is displayed when [USER TEST PATTERN 1], [USER TEST PATTERN 2], or [USER TEST PATTERN 3], in which
a test pattern is not registered in Step 2), is selected and the <ENTER> button is pressed.
f When switching the test pattern by pressing qw in Step 3), [USER TEST PATTERN 1], [USER TEST PATTERN 2], and [USER TEST
PATTERN 3] in which a test pattern is not registered are not displayed.
f Pressing qw while the [TEST PATTERN] menu is selected can also switch the test pattern.
f When the [PROJECTOR SETUP] menu → [LENS] → [ACTIVE FOCUS OPTIMIZER] → [ACTIVE FOCUS] is set to [OFF], it is
recommended to perform the focus adjustment after 30 minutes or more have elapsed with the focus test pattern displayed.
Changing the color of the cross hatch test pattern
1)
Select the [TEST PATTERN] menu, and press the <ENTER> button.
f The [TEST PATTERN] screen (list format) is displayed.
Chapter 4 Settings — [TEST PATTERN] menu
[OFF]
[ALL WHITE]
[ALL BLACK]
[WINDOW]
[CIRCLE]
[CROSS HATCH]
[FOCUS]
Test pattern is not displayed.
Displays the test pattern built-in to the projector.
To change the color of the cross hatch test pattern, refer
to "Changing the color of the cross hatch test pattern"
(x page 155).
Displays the test pattern registered by the user.
For details, refer to "Registering the test pattern"
(x page 156).
ENGLISH - 155
Advertisement
Table of Contents
