Mitsubishi Electric MR-J2S B Series Instruction Manual page 230

REVISIONS
Print Data *Manual Number
Sep., 2000 SH(NA)030007-A
Jan., 2001 SH(NA)030007-B
Oct., 2002 SH(NA)030007-C
*The manual number is given on the bottom left of the back cover.
First edition
Servo amplifier: Addition of MR-J2S-500B and MR-J2S-700B
Servo motor: Addition of HC-KFS73, HC-SFS502, HC-SFS702, HC-RFS353,
HC-RFS503, HC-UFS502 and HC-UFS352
Section 1.4: Addition of brake unit and regeneration converter
Section 1.7: Overall reexamination
Section 3.5.2: Addition of return converter and brake unit
Section 3.7: Reexamination of section 3.7 and later
Section 5.2 (2): Addition of regenerative brake option to parameter No. 2
Section 6.1.2: Addition of POINT
Changing of alarm 24 name
Section 9.2: Changes made to alarm 20 cause and action fields
Addition of alarm 33 causes 1, 2
Section 10.2 (2): Addition
Section 12.1.1 (3): Overall reexamination
Section 12.1.1 (4): Addition
Section 12.1.1 (5): Addition of MR-RB31 and MR-RB51 regenerative brake
options
Section 12.1.2: Addition
Section 12.1.3: Addition
Section 12.1.4: Addition of power supply connector set
Section 12.2.1 (1): Changing of wiring diagram
Addition of brake unit and power regeneration converter
wire size list
Section 12.2.8 (3): Addition of outline drawing
Servo amplifier: Addition of MR-J2S-11KB, MR-J2S-15KB and MR-J2S-22KB
Servo motor: Addition of HA-LFS and HC-LFS series
About processing of waste: Addition of about processing of waste
SAFETY INSTRUCTIONS: Addition of FOR MAXIMIM SAFETY
CONFORMANCE WITH UL/C-UL STANDARD:
Addition of MR-J2S-11KB to MR-J2S-22KB to(4) Capacitor
discharge time
Addition of(6) Attachment of servo motor
Addition of(7) About wiring protection
Section 1.4: Modification made to the contents of the test operation mode
Section 1.7.1: Deletion of (6)
Section 3.1.1: Addition of MR-J2S-700B or less
Section 3.1.2: Addition of MR-J2S-11KB or less
Section 3.2.1 (2): Addition of MR-J2S-11KB or less
Section 3.2.2: Addition of 11kW and more to the connector pin No.
Section 3.2.2 (C): Addition of dynamic brake sequence
Section 3.3: Addition of Note
Section 3.4.2 (2), (3): Wiring reexamination
Section 3.5: Addition of POINT
Section 3.6.2: Addition of POINT
Section 3.6.3: Addition of Note
Section 3.9: Reexamination of contents
Section 3.12: Addition
Revision