Mitsubishi Electric MR-J2S B Series Instruction Manual page 201

12. OPTIONS AND AUXILIARY EQUIPMENT
(5) Specifications
Power regeneration common converter
Item
Total of connectable servo amplifier capacities
Maximum servo amplifier capacity
Total of connectable servo motor rated
currents
Output
Regenerative
braking torque
Rated input AC voltage/frequency
Permissible AC voltage fluctuation
Power supply
Permissible frequency fluctuation
Power supply capacity (Note 2) [kVA]
Protective structure (JEM 1030), cooling system
Ambient temperature
Environment Ambient humidity
Ambience
Altitude, vibration
No-fuse breaker or leakage current breaker
Magnetic contactor
Note 1. This is the time when the protective function of the FR-CV is activated. The protective function of the servo amplifier is activated
in the time indicated in section 11.1.
2. When connecting the capacity of connectable servo amplifier, specify the value of servo amplifier.
7.5K
FR-CV-
[kW] 3.75
[kW] 3.5
33
[A]
Short-time
Total capacity of applicable servo motors, 300% torque, 60s (Note 1)
rating
Continuous
rating
17
Indoors (without corrosive gas, flammable gas, oil mist, dust and dirt)
30AF
30A
S-N20
12 - 42
11K 15K 22K
5.5 7.5 11
5 7 11
46 61 90
100% torque
Three-phase 200 to 220V 50Hz, 200 to 230V 60Hz
Three-phase 170 to 242V 50Hz, 170 to 253V 60Hz
5%
20 28 41
Open type (IP00), forced cooling
10 to 50 (14 to 122 )(non-freezing)
90%RH or less (non-condensing)
1000m or less above sea level, 5.9m/s
50AF 100AF 100AF
50A 75A 100A
S-N35 S-N50 S-N65
30K 37K 55K
15 18.5 27.5
15 15 22
115 145 215
52 66 100
or less
2
225AF 225AF 225AF
125A 125A 175A
S-N95 S-N95 S-N125