Function Speed Control; Usb Charging Port - JLG 1250AJP Operation & Safety Manual

Machine Operation
4.16.5 Swinging the Jib
To swing the jib, use the Jib Swing control switch to select Right or Left
direction.
Note: For 1000 lb (454 kg for ANSI markets and 450 kg for CE, UKCA, and Australian
markets) mode operation, the jib must be centered and the Jib swing function
is not operable. If the jib is out of the centered position when in this mode the
jib swing function will allow the operator to center the jib again.

4.17 FUNCTION SPEED CONTROL

This control affects the speed of Main Boom Telescope, Tower Boom Lift, Jib
Lift, Jib Swing, and Platform Rotate functions.
Note: During platform rotation and jib swing, a speed difference may not be
noticeable to the operator.
Turning the knob all the way counterclockwise until it clicks puts drive, main lift, tower lift, and swing into creep
mode.
Creep Mode puts the functions listed above, as well as the Drive/Steer and Main Lift/Swing functions into the
slowest speed setting.

4.18 USB CHARGING PORT

The machine is equipped with a USB charging port for the operator.
76
31222384 1250AJP