JLG 1250AJP Operation & Safety Manual page 49

Jib Swing
Allows the operator to swing the jib to the left or right.
Note: The Jib Swing function is not operable when the Capacity Select control is in the 1000 lb
(454 kg for ANSI markets and 450 kg for CE, UKCA, and Australia markets) position.
Lights / SkySense Mute (If Equipped)
This switch operates the accessory lights package if the machine is so equipped.
Note: The ignition switch does not have to be on to operate the lights, so care must be taken to
avoid draining the battery if left unattended. The master switch and/or the ignition switch at
the ground control will turn off power to all lights.
If machine is equipped with SkySense, the switch will mute the SkySense speakers.
Jib Stow Override
Allows the operator to swing the jib to the right past the electronic stop to stow the jib beside the
boom for transport.
Main Boom Telescope
Provides extension and retraction of the main boom.
Main Lift / Swing Controller
Provides main lift and swing. Push forward to lift up, pull backward to boom down. Move right to
swing right, move left to swing left.
Note: To operate the Main Boom Lift/Swing joystick, pull up on the locking ring below the handle.
Note: The Main Boom Lift/Swing joystick is spring loaded and will automatically return to neutral
(Off) position when released.
Platform Level Override
A three position switch allows the operator to adjust the automatic self leveling system. This switch
is used to adjust platform level in situations such as ascending/descending a grade.
Platform Rotate
Provides rotation of the platform.
Power / Emergency Stop
A two-position red mushroom shaped switch furnishes power to Platform Controls when pulled out
(On). When pushed in (Off), power is shut off to the platform functions.
1250AJP
Machine Controls and Indicators
31222384
49