Operator Maintenance - JLG 1250AJP Operation & Safety Manual

General Specifications and Operator Maintenance
7.6

OPERATOR MAINTENANCE

7.6.1
Note: The following numbers correspond to those in
and Lubrication Diagram - Deutz 2011/CAT
KEY
Multipurpose Grease having a minimum dripping point of 350° F (177° C). Excel- lent water re-
sistance and adhesive qualities, and being of extreme pressure type. (Timken OK 40 pounds
MPG
minimum.)
Extreme Pressure Gear Lube (oil) meeting API service classification GL-5 or MIL- Spec MIL-L-
EPGL
2105
Hydraulic Oil. API service classification GL-3.
HO
Engine (crankcase) Oil. Gas - API SF, SH, SG class, MIL-L-2104. Diesel - API CC/CDclass, MIL-L-
EO
2104B/MIL-L-2104C.
Lubrication intervals are based on machine operation under normal conditions. For
machines used in multi-shift operations and/or exposed to hostile environments or
conditions, lubrication frequencies must be increased accordingly.
Note: It is recommended as a good practice to replace all filters at the same time.
1. Swing Bearing - Remote Lube
Lube Point(s) - 2 Grease Fitting
Capacity - A/R
Lube - MPG
Interval - Every 3 months or 150 hours of operation
136
Table 13. Lubrication Specifications
NOTICE
31222384
Figure — Operator Maintenance
Engines.
SPECIFICATIONS
BM000226A
1250AJP