Anti-Interference Requirements; Other Requirements; Tools - Ruijie RG-SAP885-SP Hardware Installation And Reference Manual

Hardware Installation and Reference Guide
Nitrogen dioxide (NO
Ammonia gas (NH
Chlorine gas (CI
Note
Average refers to the average value of harmful gases measured in one week. Maximum
refers to the upper limit of harmful gases measured in one week, and the maximum
value cannot last for more than 30 minutes every day.
2.2.6

Anti-interference Requirements

Take interference prevention measures for the power supply system.

Keep the device away from the grounding equipment or lightning and grounding

equipment of the power device as far as possible.
Keep the device far away from high-frequency current devices such as high-power

radio transmitting station and radar launcher.
Take electromagnetic shielding measures when necessary.

2.2.7

Other Requirements

Regardless of whether the device is installed on the wall or ceiling, the following
conditions must be met:
Maintain sufficient clearance around the air vents of the device for heat dissipation.

The installation site allows for proper cooling and ventilation.

The installation side is sturdy enough to support the weight of the device and its

accessories.
2.3

Tools

Table 2-3 Tools
Common
Tools
) 0.04
2
) 0.05
3
) 0.01
2
Phillips screwdriver, wires, Ethernet cables, fastening bolts, diagonal
pliers, and binding straps
18
Preparing for Installation
0.15
0.15
0.3